Elhamy Elfady Mohamed Abdel hamid

1- Plan, schedule, supervise, and perform the substation and BoP daily/weekly and monthly Maintenance activities and control its compliance with RGWE Procedures and good industry practice.

2- Maintain and follow up the substation and BoP spare parts stock, tools, and consumables that are required for the substation's safe operation and maintenance process, and ensure the sourcing of such spares and tools and prepare the purchase request as per the RGWE procurement policy and procedure.

3- Review and maintain the assets register and the store item movement reports.

4- Prepare, maintain, and follow up on the annual maintenance plan considering the full coordination with all concerned parties and the windy seasons.

5- Ensure the LOTO, PTW, CMMS, and HSSE procedure and policies implementation in all related maintenance activities.

6- Support the O&M Engineers for operational & production reporting.

7- Support the O&M manager in achieving O&M targets and strategies.

8- Review and update the RGWE substation and BoP maintenance procedures.

9- Prepare and maintain any substation and BoP equipment failure, RCA, incident, and status reports.

10- Prepare for and attend any internal/external maintenance activities audit and prepare the required related documentation and reports.

11- Support the O&M engineers to coordinate with EETC regarding dispatch, maintenance, outages, testing, metering, communication, and other Operating Committee matters.

12- Supervise, lead, and train site technicians for all maintenance activities.

13- Perform daily toolbox talking (TBT) with the maintenance team.

14- Conducting regular inspections of wind turbines to identify any potential issues or maintenance needs.

15- .Performing routine maintenance tasks, such as lubrication, cleaning, and replacement of parts.

16- Troubleshooting and repairing any mechanical or electrical problems that arise.

17- Conducting tests and measurements to ensure that the turbines are operating at optimal levels.

18- Maintaining accurate records of maintenance activities and repairs.

19- Collaborating with other engineers and technicians to develop and implement maintenance plans.

20- Staying up-to-date with industry developments and advancements in wind turbine technology.

21- Ensuring compliance with safety regulations and protocols.

22- Participating in emergency response and repair efforts as needed.

• Continually observes the functioning of station equipment in substations, principally as revealed by various meters and gauges
• Observes switchboard instruments for unusual operating conditions and perform the function necessary to restore the equipment to normal or remove it from service as required
• Switches and maintains substation equipment for proper operation
• Prepares the equipment for operation and starts, stops, and controls the units, adjusting the load and voltage and accessory regulating equipment as required
• Performs switching operations following standard operating procedures
• Maintains daily operating log on all operations, both routine and emergency, and reports on line outages and weather conditions
• Records readings of indicating and integrating meters, and changes, marks, and checks charts of recording instruments
• Acts independently during an emergency by performing duties in rapid succession involving switching, adjusting load and/or voltage, or extinguishing fires
• Issues protective tags through established safe clearance procedures for all equipment in the plant and substation
• Notes change in load and make routine adjustments to meet such changes without immediate supervision
• Reports unusual situations to supervision
• Makes minor adjustments and repairs
• Maintains proper lubrication and cooling of the transformers, pumps, motor-generator sets, and other rotating machinery
• Analyzes problems to determine the type of repair necessary and inform the proper personnel
• Ensuring compliance with safety regulations and protocols
• Participating in emergency response and repair efforts as needed
• Troubleshooting and repairing any mechanical or electrical problems that arise
• Conducting tests and measurements to ensure that the turbines are operating at optimal levels.

• 110KV HYUNDIA & 115 KV ABB GIS Functions, Operation Commissioning and Electrical & Mechanical Interlock Check
• 13.8 KV ALFANAR&13.8 KV ABB&13.8 EFACEC & 13.8 KV WESQOSA &34.5 KV ABB & 4.16 KV WESQOSA Switch Gear Functions, Operation Commissioning and Electrical & Mechanical Interlock Check
• ACDB and DCDB panels Functions and operation commissioning check
• Testing and Commissioning for Protection Panels like line protection & transformer protection & load shedding & bus bar protection (high impedance and low impedance)
• Testing All interlock between (110kv & 115 KV) and 13.8 KV
• 380 KV GE GIS Functions, Operation Commissioning and Electrical & Mechanical Interlock Check
• Prepare the CID Files For all the substations
• Testing END TO END Between Substations
• Testing Transformer Stability
• Testing Busbar Stability and Sensitivity
• Configure and Testing the ATS (Automatic Transfer Switch)
• Testing The STS (Static Transfer Switch) Using The ESCALISCOPE.

• Studying the project document and drawing & documents of quality control like Inspection test plan (ITP), Work instruction, and Quality control procedure
• Attending FAT (factory acceptance test) for (MVSWGR - LVSWGR- low& medium &high voltage cable& dry type transformer)
• Inspection for all material before installation and sign off MIR & MRV
• Inspection of laying cable and termination for (low, and medium cables)
• Supervised testing of cable (continuity, insulation resistance, and Hi-pot test)
• Installation and Pre-commissioning inspection for all electrical equipment (Power and Distribution Transformers, Medium & Low voltage panelboards, Generator circuit breaker, isolated phase bus)
• Supervised and inspection of low voltage system & light current systems
• Inspection of the primary and secondary grounding systems
• Preparation of final QC dossier for handing over to the client
• Test and Commission Switch Gear Equipment such as Current Transformers (CT) and Voltage Transformers (VTs)
• Testing of Circuit Breakers, Isolators, and Earth Switches (Timing test)
• Insulation Test, Ratio Test, Polarity Test, Saturation Test using CT Analyzer- Omicron, Insulation Resistance Tester - Megger.